Is There A Juicer Attachment For Ninja? The Truth About Juicing With Ninja Appliances

You pull out your Ninja blender planning to make fresh orange juice. You chop oranges, hit the button, and get frothy orange-flavored mush with seeds. That’s not juice — it’s a smoothie you strained through a sock. It’s frustrating. And it’s a problem I hear almost every week: “Can I just buy a juicer attachment for my Ninja and get real juice?”

Short answer: No, there is no attachment that turns a Ninja blender into a juicer. But that doesn’t mean you can’t juice with Ninja gear. The company makes a separate line of dedicated cold press juicers, and those machines have their own interchangeable parts — including filters that let you control pulp level. I’ll walk you through exactly what exists, what doesn’t, and which accessory actually lets you dial in your juice texture.

Generic

Lots of Pulp Filter Replacement Part For…

Genuine OEM Lots of Pulp Filter Replacement Part For Ninja NeverClog Cold Press Juicer

See on Amazon

By the time you finish reading, you’ll know whether your current Ninja blender can do the job (it can’t), which model you’d need if you want juice, and what a replacement filter like the best juicer for celery actually does.

If you already own a Ninja NeverClog Cold Press Juicer (models JC151, JC150, COJC155, JC100, JC101, or their C variants), you can swap filters to control pulp. For example, a genuine OEM Lots of Pulp Filter Replacement Part fits those specific models. It’s a simple swap that gives you juice with more fiber — not a full blender-to-juicer conversion, but a useful upgrade for people who want thicker juice.

Myth #1: You Can Juice With a Ninja Blender Using a Simple Attachment

Ninja makes great blenders. The blades are sharp, the motor is strong. But a blender works by spinning blades inside a closed pitcher, which purees everything. A juicer separates liquid from solid fiber. Those are fundamentally different jobs. No manufacturer — not Ninja, not Vitamix, not Blendtec — sells an attachment that turns a blender into a centrifugal or masticating juicer. A blender just can’t spin fast enough to separate juice from pulp without pulverizing the fiber.

What about the Ninja Foodi Power Blender & Processor system? It comes with multiple blades and containers, including a “dough tool” and a “food processor bowl.” None of those are a juicer attachment. The blender’s base lacks the slow auger that cold press juicers need. So if you’re hoping for a $30 add-on that makes your Ninja blender spit out clear apple juice, you’ll be disappointed.

If you truly want juice — not smoothies, not pureed pulp — you need a machine built for juicing. Ninja’s own line of cold press juicers works well. But those are separate purchases, not bolt-on upgrades.

Myth #2: All Ninja Juicer Filters Are Interchangeable

Even if you own a Ninja Cold Press Juicer, you might assume any filter fits any model. Wrong. The NeverClog series uses a specific filter design that won’t work with older Ninja juicers or other brands. The replacement filter we mentioned earlier is only compatible with models JC151, JC151C, JC150, JC150C, COJC155, COJC155C, JC100, JC100C, JC101, JC101C, COJ105, JC105LA, and JC101CCO. That’s a long list, but it’s not every Ninja juicer ever made.

Why does this matter? Because ordering the wrong filter is a waste of time and money. A standard “low pulp” filter will not fit a machine that expects a “lots of pulp” variant — the plastic tabs and seal shape differ. Always check the underside of your juicer’s lid for the exact model number before buying any replacement part.

This also busts another myth: “A higher pulp filter means more juice.” It doesn’t. It means more fiber ends up in your glass. Total juice yield stays roughly the same. What changes is the mouthfeel and the amount of pulp you have to chew.

What the Lots of Pulp Filter Actually Does (And When You’d Want It)

The standard filter that ships with most Ninja NeverClog juicers produces juice with very little pulp. It’s almost clear. If you like your orange juice with a bit of body or you’re making carrot-ginger juice where you want some fiber, that standard filter feels lacking. The Lots of Pulp Filter has larger or more numerous holes (or both) that let more fine pulp pass through. You control the texture without losing much yield.

I personally keep both filters. When I juice oranges for breakfast, I use the lots-of-pulp filter. When I make a celery-based green juice guide recipe, I switch to the standard filter so the juice stays thinner and easier to drink. The swap takes about ten seconds — you twist off the old filter, twist on the new one. No tools.

One honest caveat: the Lots of Pulp Filter doesn’t produce juice as thick as what you’d get from a centrifugal juicer with a fine mesh. It’s a middle ground. If you want chunky pulp, you’re better off blending and straining. But for most people who want a naturally textured cold-pressed juice, this filter nails it.

Real Questions People Ask About Ninja Juicer Attachments

Can I use a Ninja blender as a juicer with a special attachment?

No. There is no attachment — from Ninja or any third party — that converts a Ninja blender into a juicer. The physics don’t work. A blender blade purees everything; a juicer screen separates liquid from solids. You can make a smoothie and then strain it through a nut milk bag, but that’s not an attachment, and it’s far more work.

Does Ninja make a juicer attachment for their blenders?

Ninja does not manufacture a juicer attachment for any of their blender models. They sell separate, standalone cold press juicers (like the NeverClog series). Those juicers come with their own motor base and auger. You cannot attach a juicing chamber to a blender base.

What is the difference between the standard filter and the Lots of Pulp filter?

The standard filter produces juice with minimal pulp — almost clear. The Lots of Pulp filter lets more fine fiber through, giving you thicker, cloudier juice. Both fit the same Ninja NeverClog models. Juice yield is nearly identical. Your choice depends entirely on whether you want smooth or textured juice.

Is the Lots of Pulp filter compatible with all Ninja cold press juicers?

No. It only works with the models listed on the product: JC151, JC151C, JC150, JC150C, COJC155, COJC155C, JC100, JC100C, JC101, JC101C, COJ105, JC105LA, and JC101CCO. If you have a different Ninja juicer (like an older model or a different series), this filter will not fit. Always confirm your model number before buying.

How do I clean the Lots of Pulp filter?

Rinse it immediately after juicing to prevent pulp from drying in the holes. Use the small brush that came with your juicer (or a standard bottle brush) to scrub both sides under warm water. Don’t put it in the dishwasher — the plastic may warp. Let it air dry completely before storing. Takes about two minutes if you do it right away.

What You Should Actually Do

• If you own a Ninja blender and want real juice, buy a dedicated cold press juicer. No attachment exists.
• If you already have a Ninja NeverClog juicer, check your model number before buying any replacement filter.
• Keep the standard filter for thin, clear juice (apple, celery, watermelon).
• Swap to the Lots of Pulp Filter for orange, carrot, or ginger shot juicer recipes where you want more texture.
• Store the unused filter in a ziplock bag to keep dust off it.
• Don’t expect the Lots of Pulp filter to increase juice yield. It changes texture, not quantity.
• If your filter ever cracks or wears out, genuine OEM replacements are available — but confirm compatibility first.